Six cable lines for network & energy infrastructure.
Every product is manufactured at the Netcable factory with layered quality control. The specifications below are standard configurations — all can be customised to tender requirements.
LAN Cable (Cat 5e & Cat 6)
Cat 5e & Cat 6 for enterprise backbone connectivity with stable gigabit transmission. 99.9% pure copper with LSZH jacket option for high-rise installations.
- Construction
- 4-pair UTP/FTP, Solid Bare Copper
- Conductor
- 23/24 AWG
- Jacket
- LSZH / PVC
- Bandwidth
- 100 MHz (Cat 5e) / 250 MHz (Cat 6)
- Transmission
- 1 Gbps (Cat 5e) / 10 Gbps (Cat 6)
- Operating Temp
- -20°C to +75°C
- ·0199.9% pure bare copper
- ·02LSZH flame-retardant jacket option
- ·03Shielded anti-EMI variant
- ·04Custom jacket colors available
Fiber Drop Wire
FTTH last-mile cable with galvanized steel messenger wire for aerial installation from pole to subscriber ONT. Bend-insensitive for tight-corner routing.
- Construction
- 1-core / 2-core, bend-insensitive
- Fiber Type
- G.657.A1 / G.657.A2 Single-Mode
- Strength Member
- 0.8 / 1.0 / 1.2 mm Steel Wire
- Jacket
- LSZH / PE, UV-resistant black
- Tensile Load
- ≥ 1000 N
- Operating Temp
- -40°C to +70°C
- ·01Self-supporting steel messenger
- ·02Bend-insensitive G.657 fiber
- ·03UV-resistant black jacket
- ·04Field-splice friendly
Fiber Outdoor (GYTS/GYTA53/GYFTY)
Outdoor backbone cable with corrugated steel-tape armor for impact, rodent, and harsh environmental protection.
- Construction
- GYTS / GYTA53 / GYFTY, loose tube
- Fiber Type
- 2–144 core G.652.D
- Armoring
- Corrugated steel tape
- Strength Member
- Central steel wire
- Tensile Load
- ≥ 3000 N
- Operating Temp
- -40°C to +70°C
- ·01Armored impact protection
- ·02Anti-rodent and anti-crush
- ·03Water-blocking gel in loose tubes
- ·04Outdoor UV-resistant PE jacket
ADSS (All-Dielectric Self-Supporting)
All-Dielectric Self-Supporting — 100% metal-free aerial cable reinforced with aramid yarn for long spans near PLN high-voltage lines.
- Construction
- All-dielectric, double jacket
- Fiber Type
- 6–144 core G.652.D / G.657
- Strength
- Aramid yarn (Kevlar)
- Jacket
- PE / AT (anti-tracking)
- Span
- Up to 300m+ (long-span available)
- Tensile Load
- ≥ 10 kN
- ·01100% metal-free (lightning-safe)
- ·02Aramid yarn for high-tension spans
- ·03AT jacket for HV-zone deployment
- ·04Long span without messenger wire
OPGW (Optical Ground Wire)
Optical Ground Wire — dual-function lightning shield + fiber optic transmission for PLN high-voltage tower grid networks.
- Construction
- Stainless steel tube + ACS / AC strands
- Fiber Type
- 12–72 core G.652.D
- Strength
- Aluminum-clad steel wires
- Tensile Load
- ≥ 70 kN
- Short-Circuit Capacity
- 50–200 kA²·s
- Operating Temp
- -40°C to +85°C
- ·01Dual function: grounding + telecom
- ·02High short-circuit current capacity
- ·03Extreme weather & wind tolerance
- ·04ACS strands for conductivity
FTTH Accessories
Complete passive optical equipment — ODB, splice closure, PLC splitter, patch cords, and pigtails for end-to-end PON distribution.
- Components
- ODB · Splice Closure · PLC Splitter · Patch Cord · Pigtail
- Material
- ABS / PC engineering, Stainless steel
- Rating
- IP65 / IP67 waterproof
- Wavelength
- 1310 / 1490 / 1550 nm
- Splitter Ratio
- 1:2 / 1:4 / 1:8 / 1:16 / 1:32 / 1:64
- Operating Temp
- -40°C to +70°C
- ·01IP65-sealed outdoor ODB
- ·02High-seal splice closures
- ·03Low-loss PLC splitters
- ·04SC/LC/FC/ST patch cords
Need a custom configuration?
Our engineering team prepares datasheets, test certificates, and factory pricing per tender specification within 24 working hours.